想在一台Windows Server 2008 Standard R2 上安裝Ultravnc，為了加速顯示速度也加裝了Video Hook Driver，可是在安裝時卻出現 Driver Installation Failed !
-- 隨想 --
1) . 安裝的驅動程式版本不對
2) . 使用者電腦網路端出了問題
--原因--
Google了一下，在Ultravnc的討論區找到了一篇心得分享文，It's working !。
by theFATangel » 2008-11-06 17:41
SO I spent WAY too much time trying to figure out how to get the Video Hook Driver installed in UltraVNC Server. I tried all the other suggestions I could find to no avail. For those out there with my same problem here is the solution I found; unique to the others out there. May it serve you well.
This applies to installation of the Video Hook Driver on both the Ultimate and Home Premium flavors of Vista x64 [although untested, my guess is that it will work on the other flavors as well. Not so sure about other versions of Windows though - probably some slight modifications needed]. This was tested in both a VMWare Virtual Machine and a real nuts-and-bolts HP box.
Assuming you have installed and configured UltraVNC server to your liking and have it running well:
I found the video hook drivers in the UltraVNC install directory [ C:\Program Files (x86)\UltraVNC\drivers.zip ] to work perfectly. Locate this zip archive and extract it to the root of your C:\ drive. Navigate inside the extracted directory and then inside the vista64 directory [or the directory appropriate for you OS version and type]. Once inside you should have the following:
driver [directory]
install.bat
install_silent.bat
license.txt
setupdrv.exe
uninstall.bat
uninstall_silent.bat
Right click setupdrv.exe and choose CREATE SHORTCUT.
Right click the newly created "setupdrv.exe - shortcut" and select PROPERTIES
select the SHORTCUT tab near the top of the newly appeared properties window.
In the text box to the left of Target: add " install" after the listed path to setupdrv.exe. [eg. mine reads C:\driver\vista64\setupdrv.exe install]. That is one space between setupdrv.exe and install.
Next click the ADVANCED button below and in the new window select RUN AS ADMINISTRATOR.
Click the OK button to close the Advanced Properties window, click the APPLY button in the main properties window that reappears and finally click OK to close this window.
Finally double-click the "setupdrv.exe - shortcut" icon.
You may be prompted at this point to trust/accept installation of the driver which, of course, you want to accept.
It may take a few minutes to install and the screen may flicker. There will be no confirmation of success or failure.
To confirm right click the WinVNC eye icon in your system tray and select PROPERTIES.
In the window that pops up press the CHECK THE VIDEO HOOK DRIVER button. If you get a message saying the "driver is not active" this means it is present and installed - success!
Check the VIDEO HOOK DRIVER box to the left of the button, click APPLY below and then click OK.
You are now rolling with the Video Hook Driver installed and active!
留言列表
